A Terahertz Video Camera Patch Sheet with an Adjustable Design based on Self-Aligned, 2D,Suspended Sensor Array Patterning

Terahertz (THz) imaging is expected to become powerful tools for non-destructive inspections. To ensure the practical use of THz non-destructive monitoring, versatile THz imagers with adjustable designs that can eliminate the complexities and the bulkiness of the device are urgently required. Herein, a self-aligned filtration process for a 2D, free-standing carbon nanotube film array and its application to a THz video camera patch are reported. The presented techniques enable a) to freely design the camera size, sensor array pattern, and suspended shape according to its applications, b) to cut the camera patch into desired shapes, and c) to attach them to the objects that are intended to be measured. Real-time, non-destructive monitoring of various infrastructures is demonstrated. These results indicate that it can function regardless of restrictions, such as the shapes and locations of the measurement samples, thus providing a strong possibility for use in future non-destructive sensor networks.     

Ferroelectric and electromechanical performance of diverse engineered states of Mn-doped 0.75Pb(Mg1/3Nb2/3)O3-0.25PbTiO3 ceramics

The materials processing history has a great influence on their properties and finally determines their application effect. In this paper, the ferroelectric, polarization-switching current, and strain properties of Mn-doped 0.75Pb(Mg_1/3Nb_2/3)O₃-0.25PbTiO₃ ceramics were studied in fresh state, aged state, and poled state, respectively. Compared with the symmetric polarization-electric-field (P-E) hysteresis loops, current-density-electric-field (J-E) curves, and bipolar electric-field-induced strain (S-E) curves in fresh state samples, asymmetric P-E loops, J-E curves, and bipolar S-E curves were obtained in poled state samples. Well-aged-state samples exhibit double hysteresis P-E loop, four peaks J-E curves, and symmetric S-E curves without negative strain. The symmetry-conforming short-range order (SC-SRO) principle of point defects and internal electric field E_i is employed to clarify the different phenomenon of three states. Results indicated that randomly oriented defect polarization P_D in aged samples can reverse the spontaneous polarization P_S back and result in the double hysteresis P-E loop and four peaks J-E curves. The oriented P_D and resulting E_i in poled-state samples will lead to the asymmetric loops and strain memory effect.     

A High-Throughput Screening System Based on Fluorescence-Activated Cell Sorting for the Directed Evolution of Chitinase A

Chitinases catalyze the degradation of chitin, a polymer of N-acetylglucosamine found in crustacean shells, insect cuticles, and fungal cell walls. There is great interest in the development of improved chitinases to address the environmental burden of chitin waste from the food processing industry as well as the potential medical, agricultural, and industrial uses of partially deacetylated chitin (chitosan) and its products (chito-oligosaccharides). The depolymerization of chitin can be achieved using chemical and physical treatments, but an enzymatic process would be more environmentally friendly and more sustainable. However, chitinases are slow-acting enzymes, limiting their biotechnological exploitation, although this can be overcome by molecular evolution approaches to enhance the features required for specific applications. The two main goals of this study were the development of a high-throughput screening system for chitinase activity (which could be extrapolated to other hydrolytic enzymes), and the deployment of this new method to select improved chitinase variants. We therefore cloned and expressed the Bacillus licheniformis DSM8785 chitinase A (chiA) gene in Escherichia coli BL21 (DE3) cells and generated a mutant library by error-prone PCR. We then developed a screening method based on fluorescence-activated cell sorting (FACS) using the model substrate 4-methylumbelliferyl β-d-N,N′,N″-triacetyl chitotrioside to identify improved enzymes. We prevented cross-talk between emulsion compartments caused by the hydrophobicity of 4-methylumbelliferone, the fluorescent product of the enzymatic reaction, by incorporating cyclodextrins into the aqueous phases. We also addressed the toxicity of long-term chiA expression in E. coli by limiting the reaction time. We identified 12 mutants containing 2–8 mutations per gene resulting in up to twofold higher activity than wild-type ChiA.     

Structural,ferroelectric, magnetic and magnetoelectric properties of (1-x) Ba0.85Ca0.15Zr0.1Ti0.9O3 -x La0.67Sr0.33MnO3 lead-free magnetoelectric composites

The influence of an additional La_0.67Sr_0.33MnO₃ (LSMO) magnetic phase on the structural, ferromagnetic, ferroelectric, and magnetoelectric properties of Ba_0.85Ca_0.15Zr_0.1Ti_0.9O₃ (BCZT) ferroelectric phase was studied for composites of (1-x)BCZT -xLSMO (x = 0, 25, 50, 75 and 100%). The ferroelectric BCZT sample showed a perovskite single phase formation with a tetragonal crystal structure of the P4mm space group, and the magnetic phase of LSMO presented a rhombohedral crystal structure of R3c space group as shown by XRD. The composite sample with 25% LSMO exhibited large ferroelectric and piezoelectric properties with remnant, saturation polarization, and coercive electric field P_r ~7.74 μC/cm², P_s ~11.69 μC/cm² and E_C ~12.22 kV/cm with a piezoelectric coefficient d₃₃ ~ 231 pC/N. The magnetic characterization for the composites showed that the sample containing 75% of LSMO revealed the highest remnant, saturation magnetization, and coercive field of M_r ~1.358 emu/g, M_s ~19.17 emu/g, and H_C ~33.19 Oe, respectively. Moreover, it revealed the largest magnetoelectric coupling coefficient α_ME ~2.51 mV/cm.Oe with high coupling quality at a lower applied magnetic field. The results highlight the value of these composites as lead-free room temperature magnetoelectric sensors and actuators.     

基于Prophet人工智能算法的网络潮汐效应预测研究

本文使用Prophet人工智能算法研究与预测移动通信网络“潮汐效应”现象，探索网络“潮汐效应”在优化网络资源配置实现网络降本增效的作用。Prophet人工智能算法是一种简单、有效，且易于实现的人工智能算法。通过facebook的人工智能开源框架fbprophet，研究4G网络PRB利用率等网络资源指标的“潮汐效应”，并预测这些网络资源指标在未来的变化趋势，用来指导当前4G网络减容、扩容和4/5G节电节能等，实现优化网络资源配置达到降本增效的目的。     

Touch sensor and photovoltaic characteristics of CuSbS2 thin films

Spin-coated chalcostibite CuSbS₂ thin films (≈500 nm thick) were fabricated and the influence of the drying temperature on the structural, morphological, optical and thermoelectric properties of the films was investigated. Crystalline phase-pure chalcostibite has been obtained for the films dried at 180 °C and 210 °C, while below 180 °C these films are partially amorphous. Surprisingly, at drying temperature of 240 °C, a Cu_xS secondary phase appeared. The increase of the drying temperature leads to the increase of the particle size and the decrease of the optical band gap, which is interesting for optoelectronic applications. The highest power factor value was achieved for the film dried at 210 °C, due to the inexistence of secondary phases, which allowed realizing a stable thermoelectric touch sensor with a V_signal/_noise of 5. In addition, this film was tested as a photovoltaic (PV) device and a power conversion efficiency (PCE) of 0.030% with an open-circuit voltage (V_OC) of 0.36 V, a short-circuit current density (J_SC) of 0.278 mAcm^?2 and a fill factor (FF) of 0.27 were obtained. Therefore, this work evidences a pathway toward developing bi-functional devices with simultaneously thermoelectric touch sensor and photovoltaic functions.     

Entrapping Ru nanoparticles into TiO2 nanotube: Insight into the confinement synergy on boosting pho-thermal CO2 methanation activity

CO₂ methanation is a significant route to decrease carbon emission as well as realize carbon neutrality and has gained considerable concerns from experts in the environment and energy field currently. Herein, highly dispersed ruthenium nanoparticles entrapped in TiO₂ nanotubes, labeled as Ru-in/TNT, were constructed and adopted for photo-thermal driven CO₂ methanation. The Ru nanoparticles confined in the nanotube exhibited an enhanced CO₂ methanation activity, especially under light irradiation. Multiple characterization techniques (XRD, XPS, UV–vis DRS, HRTEM, Raman, etc.) were conducted to reveal the effect of confinement synergy on photo-thermal catalytic performance. A boosted photo-generated electron-hole separation efficiency is achieved as a result of the confinement effect, yielding more hot electrons to accelerate methanation activity. This photo-assisted confinement synergy can be expected for constructing an efficient photo-thermal catalytic system.     

A method of assessing essential amino acid availability from microbial and ruminally undegraded protein in lactating dairy cows

The objective of this study was to extend a stable isotope-based assessment of AA absorption from rumen-degradable protein (RDP) sources to include determination of essential AA (EAA) availability from microbial protein (MCP). To demonstrate the technique, a study using a 2 × 2 factorial arrangement of treatments applied in a repeated 4 × 4 Latin square design was undertaken. Factors were high and low rumen-degradable protein and high and low starch. Twelve lactating cows were blocked into 3 groups according to days in milk and randomly assigned to the 4 treatment sequences. Each period was 14 d in length with 10 d of adaption followed by 4 d of ruminal infusions of ¹⁵N-labeled ammonium sulfate. On the last day of each period, a ¹³C-labeled AA mixture was infused into the jugular vein over a 6-h period to assess total AA entry. Rumen, blood, urine, and milk samples were collected during the infusions. Ruminal bacteria and blood samples were assessed for AA enrichment. Total plasma AA absorption rates were derived for 6 EAA from plasma ¹³C AA enrichment. Absorption of 6 EAA from MCP was calculated from total AA absorption based on ¹⁵N enrichment in blood and rumen bacteria. Essential AA absorption rates from total protein, MCP, and rumen-undegradable protein were derived with standard errors of the mean of 6, 14, and 14%, respectively. An average of 45% of absorbed EAA were from MCP, which varied among 6 EAA and was interactively affected by starch and RDP in diets. Microbial AA availability measured by isotope dilution method increased with the high RDP diets and was unaffected by starch level, except for Met, which decreased with high starch. Microbial protein outflow, estimated from urinary purine derivatives, increased with RDP and was not significantly affected by starch. This was consistent with measurements from the isotope dilution method. Total AA absorption rates measured from isotope dilution were similar to estimates from CNCPS (v. 6.55), but a lower proportion of absorbed AA was derived from MCP for the former method. Compared with the isotope and CNCPS estimates, the Fleming model underestimated microbial EAA and total EAA availability. An average of 58% of the absorbed EAA was converted into milk, which varied among individual AA and was interactively affected by starch and RDP in diets. The isotope dilution approach is advantageous because it provides estimates of EAA availability for individual EAA from rumen-undegradable protein and MCP directly with fewer errors of measurement than can be achieved with intestinal disappearance methods.     

长江经济带工业集聚对水环境污染的影响——基于空间计量与门槛效应的检验

经济发展与生态环境动态良性循环已经成为社会经济发展的重要议题。为实现长江经济带高质量发展，以2007—2018年长江经济带11个省市为样本，采用空间计量和面板门槛模型考察工业集聚与水环境污染之间的关系。研究表明：长江经济带各省市水环境污染具有显著的空间自相关性；长江经济带工业集聚水平和水环境污染表现出先降低后增强的“U”形变化特征，说明工业集聚水平对水环境污染的影响存在一个阈值；长江经济带工业集聚产生的规模效应和结构效应对水环境污染存在显著的双门槛效应，在不同的工业集聚水平下，规模效应和结构效应表现出不同的外部性特征；工业集聚产生的技术溢出效应对水环境污染的影响同样具有显著的双门槛作用；随着各地区工业集聚水平的提高，技术溢出效应对水环境污染的减排作用表现出先强后弱的趋势。